GORKAL 70F
The material was created to offer the refractory Customers high refractoriness parameter and followed by shorter than regular GÓRKAL 70F setting time. It is important to mention that the material is chemically pure cement.
APPLICATION
Thanks to high purity and very good refractoriness the GÓRKAL 70F can be used in variety of refractory products especially in gunning, shotcreeting applications.
- office@credicom.rs
- +381 (0)11 329 24 29
- +381 (0)11 329 22 90
- +381 (0)11 329 09 48
- +381 (0)69 329 09 48
OUR PRODUCTS:
GORKAL 40
GÓRKAL 40 is a hydraulic binder for refractory and building applications. Fast strength development and short setting time are advantages of GÓRKAL 40 cement.
ALI PRE CSA Clinker
i.tech® ALI PRE is ground Calcium Sulfoaluminate clinker (CSA). i.tech® ALI PRE offers more flexibility as the binding time can be managed over a very wide time period. Even the strength development can be moulded very flexibly thanks to the mixing ratio with Portland cement and calcium sulphate.
GORKAL 80
GÓRKAL 80 is a hydraulic binder with high content of Al2O3. The material was created to offer the refractory Customers high refractoriness parameter and satisfying mechanical properties.
GORKAL 50
GÓRKAL 50 is a hydraulic binder for refractory and building applications. Fast strength development (80% in 12h from preparation) and short setting time are advantages of GÓRKAL 50 cement.
GORKAL 70
The GÓRKAL 70 refractory cement is a hydraulic binder used for production of concretes, mortars and refractory mixtures.
-
GORKAL 70F
The material was created to offer the refractory Customers high refractoriness parameter and followed by shorter than regular GÓRKAL 70F setting time. It is important to mention that the material is chemically pure cement.
GLACIER CEM I
White cement GLACIER is a white Portland cement, manufactured by special technology including selected raw materials with low amounts of iron and magnesium.
AALBORG CEM I
AALBORG WHITE® cement gives you the opportunity to choose among all the colours of the spectrum when producing your concrete or dry mix.
ROTARY KILN
Calcined Bauxite is a processed & graded chemically inert aggregate containing a minimum of 80% alumina as Al2 O3.
SHAFT KILN
Calcined Bauxite is a processed & graded chemically inert aggregate containing a minimum of 80% alumina as Al2 O3.
K 663
Form - fine powder of brown colour Physico-chemical properties - Iron oxide brown K 663 is synthetic inorganic pigment.
TITANIUM DIOXIDE KTR 720
Physico-chemical properties - Titanium dioxide KTR 720 is titanium oxide TiO2, rutile type produced by sulphate method with surface treatment Al+Si.
CORUNDUM BROWN
Corundum Brown is a loose material which is acquired by gradual melting reduction of bauxites in electrical furnace.
WHITE CORUNDUM
White Corundum is produced by fusing clean Al2O3 in induction furnaces.
TALC
Physical-chemical properties - Talc is a mineral, alkalic magnesium silicate
TITANIUM DIOXIDE R-001
White powder with the crystallographic form of rutile, non-toxic, non-flammable and chemically inactive. Surface treated with aluminium compounds (in amount of 3% as Al2O3) and modified with hydrophilic organic compounds.
TP 303
Form - fine powder of red colour Physical-chemical properties - Iron oxide red Fepren TP 303 is synthetic inorganic pigment, iron oxide with a small quantity of mixtures.
-
CK130
Physical-chemical properties - Iron oxide red CK 130 is synthetic inorganic pigment, iron oxide with a small quantity of mixtures
IRON OXIDE MR 25
Physico-chemical properties - Iron pigment MR 25 is natural pigment with good optical features. It is resistant to light, warm and neither its chemical nor physical status does change under the influence of humidity, alkalis or weak acids.
-
IRON OXIDE MR 50
Physico-chemical properties - Iron pigment MR 50 is natural pigment with good optical features
GREEN CHROME OXIDE
Form - fine powder of green colour Physico-chemical properties - Chrome oxide Cr2O3 is synthetic, thermal very resistant pigment, stable and resistant to acids and alkalis. It is also light-stable.
CK 835
Form - fine powder of green colour Physico-chemical properties - Iron oxide green CK 835 is fine, non-toxic, light-resistant with a good hiding power.
K 500
Form - fine powder of brown colour Physico-chemical properties - Brown pigment K 500 is mixture pigment on basis of iron and manganese oxides
CK 920
Form - fine powder of yellow colour Physico-chemical properties - Iron oxide yellow CK 313, CK 920 is fine, non-toxic, inorganic pigment, light-resistant with a good hiding power.
CK 960
Form - fine powder of orange colour Physico-chemical properties - Iron oxide orange CK 960 is fine, non-toxic, inorganic pigment, light-resistant with a good hiding power.
ULTRAMARINE
Form - fine powder of blue colour Physico-chemical properties -Ultramarine Extra has an excellent clear colour tint of high brightness.
CK 722
Form - fine powder of black colour Physico-chemical properties - Inorganic pigment - iron oxide CK 722 is stable, light-resistant pigment with good optical features.